LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1989 >> Precis Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [J,X] & 1.6L 4-CYL - VINS [Y,Z] >> Overhaul >> Rear Main Oil Seal >> Removal

Rear Main Oil Seal: Removal

  1. Remove flywheel or drive plate. Remove oil seal case from rear of cylinder block. It may be necessary to remove oil pan. Remove oil seal from seal case.
  2. On 1.6L models, an oil separator plate is located behind the oil seal in the oil seal case.
CAUTION: On 1.6L models, ensure oil separator plate is installed in oil seal case with oil hole located toward oil pan sealing area at bottom of oil seal case.
scientia non olet · About LEMON Manuals