LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1989 >> Galant Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VINS (D,R,V) & 2.4L 4-CYL - VIN (W) >> Removal & Installation >> Rocker Arm >> Reassembly & Installation

Reassembly & Installation

  1. Install components in original location. Rocker arms are marked "1-3" for odd cylinders and "2-4" for even cylinders. Install short springs on exhaust valve shaft and long springs on intake valve shaft.
  2. Install rocker arms in proper location. To install remaining components, reverse removal procedure. Tighten rocker arm assembly retaining bolts to specification. Adjust valve clearance.
scientia non olet · About LEMON Manuals