Removal & Installation: Engine: Installation
To install, reverse removal procedure. Ensure that all hoses and wiring are cleared when lowering engine assembly into compartment. Perform final tightening of mounting bolts and nuts (to specification) with weight of engine on insulators. Replace all fluids and adjust all cables and linkages.
To install, reverse removal procedure. Ensure that all wiring and hoses are cleared when lowering engine assembly into compartment. Tighten mounting bolts and nuts to specification with weight of engine on insulators. Replace all fluids and adjust all cables and linkages.
To install, reverse removal procedure. Ensure that throttle, transaxle cables and drive belts are properly adjusted. Tighten mounting bolts and nuts to specification with weight of engine on insulators. Replace all fluids and check gauges for correct operation.