LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1989 >> Galant Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VINS (D,R,V) & 2.4L 4-CYL - VIN (W) >> Overhaul >> Rod Bearing >> Removal & Installation

Removal & Installation

  1. Mark bearing cap and connecting rod for location. Remove connecting rod cap and bearing. Install replacement bearing. Ensure reference marks on rod cap and connecting rod are aligned. Check bearing clearance using Plastigage method.
  2. Lubricate all components with engine oil before reassembling. Tighten nuts to specification. See TORQUE SPECIFICATIONS . Ensure connecting rod moves freely on crankshaft. Check connecting rod side clearance.
scientia non olet · About LEMON Manuals