LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1989 >> Galant Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VINS (D,R,V) & 2.4L 4-CYL - VIN (W) >> Overhaul >> Crank Bearing >> Removal

Crank Bearing: Removal

  1. Remove engine form vehicle as previously described. Separate transaxle from engine assembly. Remove oil pan. Remove flywheel and rear plate assembly. Remove oil seal case, gasket, oil separator and oil seal. Remove front cover and timing gear assembly.
  2. Remove connecting rod caps and bearings. Note direction of arrow on main bearing caps. Remove main bearing caps. Ensure all components are placed in correct order. Remove crankshaft. Remove main bearings from cylinder block. Mark bearings for location.
CAUTION: Note type of bearing and location. Bearings may contain different types of lubrication holes.
scientia non olet · About LEMON Manuals