LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1989 >> Galant Base, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Rotor (Mirage) >> Removal (Mirage)

Removal (Mirage)

  1. Raise and support front of vehicle. Remove front wheel(s). Remove caliper. Remove cotter pin, wheel bearing nut and washer.
  2. Separate lower ball and tie rod end from steering knuckle. Using Puller (MB990241-01), push drive shaft through hub. Remove steering knuckle-to-strut housing bolts.
  3. Remove knuckle from strut assembly. Remove hub and knuckle assembly. Using Bracket (MB991056) and Bolt (MB990998), separate hub from steering knuckle. See Figure . Remove rotor from hub.