LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1988 >> Van Base, Van Passenger >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [G], 2.0L 4-CYL [D], 2.4L 4-CYL [L] >> Removal & Installation >> Water Pump

Water Pump

Drain cooling system and disconnect battery. Remove drive belt and pulley. Remove mounting bolts and remove pump assembly from engine. To install, use new gasket and reverse removal procedure.

NOTE: For further information on cooling system capacities and other cooling system components, see ENGINE COOLING SYSTEMS article in this section.
scientia non olet · About LEMON Manuals