Master Cylinder: Installation
Reverse removal procedure. Prior to installation, check and adjust clearance between back of master cylinder piston and power brake push rod. See PUSH ROD CLEARANCE SPECIFICATIONS table in this article. After installation, adjust pedal height and bleed brake system.
Reverse removal procedure. Prior to installation, check and adjust clearance between back of master cylinder piston and power brake push rod. See PUSH ROD CLEARANCE SPECIFICATIONS table in this article. After installation, adjust pedal height and bleed brake system.
PUSH ROD CLEARANCE SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| Cordia, Mirage, Pickup (2WD), & Tredia | .016-.031 (.41-.79) |
| Starion | .028-.043 (.71-1.09) |
| Galant & Van/Wagon | .059-.075 (1.50-1.91) |
| Montero | .004-.020 (.1-.5) |
| Pickup (4WD) | .028-.043 (.71-1.09) |