LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1988 >> Starion ESI-R, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.6L 4-CYL - VIN [E] & 2.6L 4-CYL Turbo - VIN [N] >> Removal & Installation >> Valve Guide Service >> Valve Stem Oil Seal Service

Valve Stem Oil Seal Service

With valve spring seat installed, place stem seal on guide. Using Valve Seal Installer (49 WD37 160) for Mazda B2600 models and (MD998729-01) on all other models, lightly tap seal into position. DO NOT  reuse old seals or twist seals when installing.

NOTE: Information for Conquest TSi, B2600, Raider and Ram-50 is not available from manufacturer.
scientia non olet · About LEMON Manuals