LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1988 >> Starion ESI-R, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.6L 4-CYL - VIN [E] & 2.6L 4-CYL Turbo - VIN [N] >> Overhaul >> Piston Pins Replacement >> Notes

Piston Pins Replacement: Notes

NOTE: If new connecting rod is installed, ensure identification mark and notch area of bearing cap are installed on same side. See. Figure. Pin-to-rod fit at normal temperature will require 1653-3858 lbs. (750-1,750 Kg) to press pin through rod.