LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1988 >> Starion ESI-R, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.6L 4-CYL - VIN [E] & 2.6L 4-CYL Turbo - VIN [N] >> Engine Cooling >> Water Pump >> Removal & Installation

Removal & Installation

Drain cooling system and disconnect battery. Remove fan shroud (if equipped) and lower radiator hose. Remove drive belt, cooling fan, fan clutch, and pulley. Remove water pump. To install, reverse removal procedure using new gasket.

NOTE: For further information on cooling system capacities and other cooling system components, see ENGINE COOLING SYSTEMS article.
scientia non olet · About LEMON Manuals