LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1988 >> Precis Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [J,K] & 1.6L 4-CYL - VIN [F] >> Overhaul >> Oil Pump & Front Case (1.5L) >> Installation

Oil Pump & Front Case (1.5L): Installation

  1. To install, reverse removal procedure. Ensure that gears are assembled in same direction as originally installed. Install new oil seal using a flat plate. Use new gasket and install front case assembly. Install front case mounting bolts in original positions. Install oil screen.
  2. Apply a .16" (4.0 mm) bead of sealer into groove of oil pan flange. Tighten mounting bolts to specification.
scientia non olet · About LEMON Manuals