LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1987 >> Van LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [G], 2.0L 4-CYL [D], 2.4L 4-CYL [L] >> Removal & Installation >> Silent Shafts & Bearings >> Installation

Silent Shafts & Bearings: Installation

  1. Lubricate inner surface of bearings. Install rear bearings using Adapter (MD998374-01), on left side only, and Bearing Installers (MB990438-01 and MD998373-01). Install right front silent shaft bearing using Installer (MD998373-01) and Handle (MB990938-01).
  2. Ensure oil holes in block and bearing are aligned. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals