Wheel Bearing: Notes
Remove dust cap, cotter pin and nut retainer. While turning wheel or drum, tighten adjusting nut to 14 ft. lbs. (20 N.m). Loosen nut and retighten to 44 INCH lbs. (5 N.m). Reinstall dust cap, cotter pin and nut retainer.
Remove dust cap, cotter pin and nut retainer. While turning wheel or drum, tighten adjusting nut to 14 ft. lbs. (20 N.m). Loosen nut and retighten to 44 INCH lbs. (5 N.m). Reinstall dust cap, cotter pin and nut retainer.