LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1985 >> Tredia L, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [G], 2.0L 4-CYL [D], 2.4L 4-CYL [L] >> Engine Specifications >> Pistons, Pins & Rings Specifications

Pistons, Pins & Rings Specifications

PISTONS, PINS & RINGS SPECIFICATIONS

Application Ft. Lbs. (N.m)
Pistons
Journal Diameter 2.244 (57)
Clearance .0008-.0016 (.02-.04)
Pins
Piston Fit (1)
Rod Fit (2) Push Fit
Rings
Ring No. 1
End Gap (3).012-.018 (.30-.46)
Side Clearance .002-.004 (.05-.10)
Ring No. 2
End Gap (4).012-.016 (.30-.41)
Side Clearance .001-.002 (.02-.05)
Oil Ring
End Gap .008-.028 (.2-.7)
Side Clearance N/A
(1) Thumb press fit without rod installed.
(2) Press in at 1653-3858 lbs. at room temp.
(3) Ring end gap is.010-.018" (.25-.46 mm) on 2.0L and 2.4L.
(4) Ring end gap is.010-.018" (.2-.4 mm) on 2.0L and 2.4L.
scientia non olet · About LEMON Manuals