LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1985 >> Tredia L, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [G], 2.0L 4-CYL [D], 2.4L 4-CYL [L] >> Engine Cooling >> Water Pump >> Removal & Installation

Removal & Installation

Drain cooling system and disconnect battery. Remove drive belt and pulley. Remove mounting bolts and remove pump assembly from engine. To install, use new gasket and reverse removal procedure.

NOTE: For information on cooling system capacities and other cooling components, see appropriate article in the

ENGINE COOLING SYSTEMS section.

scientia non olet · About LEMON Manuals