LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1985 >> Montero Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.6L 4-CYL - VIN [E] & 2.6L 4-CYL Turbo - VINS [H,N] >> Removal & Installation >> Counterbalance Drive Chain >> Installation

Counterbalance Drive Chain: Installation

  1. To install, reverse removal procedure. Ensure mating marks on sprockets align with plated links on counterbalance chain. Adjust tension by installing guides "A" and "C".
  2. Shake counterbalance shaft sprockets to take slack from chain. Adjust guide "B" so there will be .040-.140" (1.0-3.5 mm) clearance between guide and chain at point "P". Tighten guide mounting bolts and complete assembly.
Fig 1: Exploded View of Counterbalance Shafts & Drive Chain
G82076
NOTE: Right counterbalance shaft is driven by oil pump.
scientia non olet · About LEMON Manuals