Oil Pressure Gauge: Pickup
Connect a 14-volt, 1.4-watt bulb between connector terminal and ground. Bulb should light and gauge should read around 60 psi (4.2 kg/cm2 ). If gauges do not have psi marks, needle should point at second of 2 center marks.
Connect a 14-volt, 1.4-watt bulb between connector terminal and ground. Bulb should light and gauge should read around 60 psi (4.2 kg/cm2 ). If gauges do not have psi marks, needle should point at second of 2 center marks.