51 13 105 Removing and installing/replacing trim on rear left or right wheel arch (Cooper base 2-door hatchback, Cooper S 2-door hatchback, Cooper JCW 2-door hatchback, Cooper SE Electric 2-door hatchback)

Removal: 

Release trim (1) on the clips (2, 3).

Release trim (1) in the area of the bumper from the detents.

If necessary, unlock associated plug connection and disconnect.

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing with USA national version: 

Remount SIDE MARKER LIGHT .

Installation: 

Courtesy of BMW OF NORTH AMERICA, INC.

Replace faulty clips (2, 3).

If necessary, connect plug connection.

Attach trim (1) and engage at clips (2, 3).

Engage trim (1) in the area of the bumper in the detents.

Courtesy of BMW OF NORTH AMERICA, INC.