Removing and mounting/exchanging side cover of front bumper (Cooper base 4-door hatchback, Cooper S 4-door hatchback, Cooper S 2-door hatchback, Cooper JCW 2-door hatchback, Cooper JCW GP 2-door hatchback)

Preliminary work needed: 

• REMOVING FRONT BUMPER COVER .

REMOVAL: 

Release catches (1).

Remove cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement (depending on version): 

• Remount ultrasonic sensor. Refer to 66 20 515 REMOVING AND INSTALLING/REPLACING A FRONT LEFT (OUTSIDE) ULTRASONIC TRANSDUCER (PARK DISTANCE CONTROL) (COOPER 4-DOOR HATCHBACK AND COOPER 2-DOOR HATCHBACK, 2020-2023) and 66 20 515 REMOVING AND INSTALLING/REPLACING A FRONT RIGHT (OUTSIDE) ULTRASONIC TRANSDUCER (PARK DISTANCE CONTROL) (COOPER 4-DOOR HATCHBACK AND COOPER 2-DOOR HATCHBACK, 2020-2023) .

INSTALLATION: 

Engage cover (2) in the detents (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install FRONT BUMPER COVER .