REP-TAT-P-5434-01 Removing the convertible top brace bearing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work

Open LOADING AID

Right side only:
Unlock plug connection (1) and disconnect.

Unclip the connector (2) from the convertible top brace bearing (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Remove the protective cap (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Highlight the position of the screws (1) and (2) on the convertible top brace bearing (4).
Loosen screws (1), (2) and (3).
Remove the convertible top brace bearing (4).

Courtesy of BMW OF NORTH AMERICA, INC.