1114 FRONT TIMING CASE COVER, REAR TIMING CASE COVER (Cooper base)
1114 TIGHTENING TORQUE OVERVIEW
| Front timing case cover on the crankcase |
| M6 |
Tightening torque |
4 Nm |
| Angle of rotation |
60° |
| Oil pan on the timing case cover |
| M8 |
Tightening torque |
24 Nm |
| Rear timing case cover to engine block |
M6 x 31
Replace screws. |
Joining torque |
8 Nm |
| Angle of rotation |
90° |