1165 TURBOCHARGER (Cooper base)
1165 TIGHTENING TORQUE OVERVIEW
| Electrical wastegate valve controller to exhaust turbocharger | ||
| Replace screws. Tighten screws crosswise. |
Tightening torque | 3 ± 0.5 Nm |
| Exhaust turbocharger to cylinder head | ||
| M7 Replace screws. Replace nuts. |
1. Joining torque | 5 |
| 2. Tightening torque | 18 Nm | |
| 3. Tightening torque | 18 Nm | |