1153 COOLANT LINES, HEAT EXCHANGE MODULE / THERMOSTAT (Cooper S, Cooper JCW)
1153 TIGHTENING TORQUE OVERVIEW
| Coolant feed line and return line to exhaust turbocharger | ||
| M6 | Tightening torque | 8 Nm |
| Coolant feed line to crankcase | ||
| M6 | Tightening torque | 8 Nm |
| Coolant line to coolant pump/cylinder head | ||
| M6x20 | Tightening torque | 8 Nm |
| Coolant line to coolant pump/cylinder head | ||
| M6x20 | Tightening torque | 8 Nm |
| Coolant line to cylinder head | ||
| M6 | Tightening torque | 8 Nm |
| Heat exchange module to crankcase | ||
| M6 | Tightening torque | 9 Nm |