1111 CRANKCASE (Cooper S, Cooper JCW)
1111 TIGHTENING TORQUE OVERVIEW
| Main bearing cap to crankcase | ||
| M10x1.5 1. Replace screws. |
1. Joining torque | 25 Nm |
| 2. Angle of rotation | 60° | |
| 3. Angle of rotation | 60° | |
| Oil deflector to crankcase | ||
| M8x35 Replace screws. |
Joining torque | 15 Nm |
| Tightening torque | 45° | |
| Special tool 11 8 930 to special tool 00 2 320 | ||
| M14x35 | Tightening torque | 160 Nm |
| Special tool 2 413 082 to special tool 00 2 320 | ||
| M12x65 | Tightening torque | 100 Nm |