3341 Wheel Bearings
3341 WHEEL BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel bearing to trailing arm | F54/F55/F56/F57/F60 | M12 | Joining torque and angle of rotation must be observed without fail. Replace screws. Joining torque Angle of rotation |
100 Nm 90° |
| 2AZ Wheel bearing (hub) on output shaft | F54 ALL/F60 ALL | M16 | Joining torque and angle of rotation must be observed without fail. Replace screw. Joining torque Angle of rotation |
210 Nm 90° |