3332 Trailing Arms, Rear Control Arms
3332 WISHBONE/TRAILING ARM AND STRUTS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper wishbone to trailing arm | F54/F55/F56/F57/F60 | M12 | Replace eccentric screw, eccentric washer and nut. | 100 Nm |
| 2AZ Lower wishbone to trailing arm | F54/F55/F56/F57/F60 | M12 | Replace screw and nut. TIGHTENING IN NORMAL POSITION . | 100 Nm |
| 3AZ Wishbone to rear axle support | F54/F55/F56/F57/F60 | M12 | Replace screw and nut. Tighten in normal position. |
100 Nm |
| 4AZ Trailing arm bearing support to trailing arm | F54/F55/F56/F57/F60 | M12 | Replace screw and nut. TIGHTENING IN NORMAL POSITION . | 100 Nm |
| 5AZ Trailing arm bearing support to body | F54/F55/F56/F57/F60 | M12 | Replace screw. | 100 Nm |
| 6AZ Cover to trailing arm | F54/F55/F56/F57/F60 | 3 Nm |
3332 TIGHTENING TORQUE OVERVIEW
| Upper wishbone to rear axle carrier | ||
| M12 Replace screw and nut. Tighten in normal position. | tightening torque | 100 Nm |