Installing fuel delivery line

• Guide the fuel delivery line (1) in and install.
• Make sure the rubber damper (2) is positioned correctly.
• Tighten the union nut (3) hand-tight.
• Hand-tighten the bolts (4).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Fuel delivery line to cylinder head cover
  M6x18	tightening torque	7Nm

• Tighten union nut (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Fuel delivery line to high pressure pump
  M14	Tightening torque	26Nm

• Connect the fuel line (1) to the fuel supply line (5) and lock.

  The fuel line (1) must engage audibly.

• Ensure that the rubber damper (4) is correctly installed.
• Insert and install the sound insulation (2).
• Connect and lock the connector (1).

  The connector (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to INSTALLING THE UPPER BULKHEAD COVER PANEL .
• Refer to INSTALLING THE FRONT HOOD SEAL AT THE REAR .