Test conditions for chassis/wheel alignment check
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Only MINI approved wheel and tire combinations are installed on the vehicle.
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 1 2 mm.
- Correct tire pressure (see label on vehicle).
- All chassis components must be technically OK.
- Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.