66 33 010 Removing and installing/replacing ultrasound sensor for parking assistant

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Partially remove COVER WHEEL ARCH, FRONT LEFT OR RIGHT

REMOVAL:

Unfasten plug connection (1) and disconnect.

Unlock latches at marked points.

Pull ultrasonic transducer (2) out of holder.

Fig 1: Pulling Ultrasonic Transducer Out Of Holder

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Engage ultrasonic sensor (2) in holder.

Join and lock plug connection (1).

NOTE: Latch mechanisms must not be damaged!

Make sure ultrasonic sensor (2) is securely seated.

Fig 2: Pulling Ultrasonic Transducer Out Of Holder

Courtesy of BMW OF NORTH AMERICA, INC.