REP-TAT-P-5462-01 Remove roll-over protection system

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Prerequisite

Convertible top is completely open.

WARNING: Preload on the rollover protection system.
Danger! Immobilization period-threatening injuries!

Make sure that no persons or objects are present in the immediate vicinity of the rollover protection system when it is activated.
Activate the rollover protection system only when the convertible top is open.

Lever out the trim panel (1) and place to one side.

Courtesy of BMW OF NORTH AMERICA, INC.
Lever out seal plug (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the screwdriver (1) 15 cm into the side bore.
Press the screwdriver (1) in the direction of the arrow to release detent (2) for the rollover protection system.

The rollover protection system will be activated.

Courtesy of BMW OF NORTH AMERICA, INC.