LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2024 >> Cooper Clubman JCW ALL4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Heating And Air Conditioning - Repair (F57)) >> 64 11 Heating And Air-Conditioning Unit With Actuation >> Replace the evaporator temperature sensor

Replace the evaporator temperature sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed: 

Removal: 

Disconnect plug connection (1).

Pull the evaporator temperature sensor (2) out of the heating and air-conditioning unit (3) and remove.

G11149037Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

NOTE: Make sure the evaporator temperature sensor (2) is correctly fitted.

Fit the evaporator temperature sensor (2) correctly in the heating and air-conditioning unit.

Connect plug connection (1).

G11149037Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: