Removing and installing/replacing windshield washer pump (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Before replacing the windshield washer pump, check the washer fluid reservoir for dirt contamination and clean if necessary!

Preliminary work needed:

Partially release front right WHEEL ARCH COVER .

Removal:

NOTE: Catch any leakage washer fluid if necessary.

Unlock and disconnect the connector (1).

Unlock hose pipes and disconnect from windshield washer pump (2).

Pull windshield washer pump (2) upwards out of washer fluid reservoir for washer system.

If necessary, remove sealing ring with strainer (3) from washer fluid reservoir and windshield washer pump (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Replace sealing ring with strainer (3).

Coat sealing ring (3) with lubricant.

Ensure hose pipes are laid without kinks.

Feed in windshield washer pump (2) into washer fluid reservoir for washer system.

Connect hose pipes to windshield washer pump (2).

Connect the connector (1).

If necessary, top up washer fluid reservoir.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Secure front right WHEEL ARCH COVER .