Removing and installing/replacing side panel on dashboard on left or right (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 327
When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).
Removal:
Detach edge protection (1) in area of side cover (2).
Unclip side panel (2) with the special tool 00 9 327.
If necessary, unlock associated plug connection and disconnect.
Feed out side panel (2) and remove.
Installation:
Mount side panel (1).
Make sure that it is seated correctly on edge protection (2).