22 11 Engine Mounting
22 11 ENGINE MOUNTING - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mount to cylinder head | F54/F55/F56/F57/F60 | M10 10.9 | Replace screws | |
| Joining torque | 40 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Engine mount to side member | F54/F55/F56/F57/F60 | M12 10.9 | 100 Nm | |
| 3AZ Engine mounting bracket to cylinder head | F54/F55/F56/F57/F60 | M10 8.8 | 41 Nm | |
| 4AZ Holder with rubber mount to oil pan | F54/F55/F56/F57/F60 | M12 10.9 | 100 Nm | |
| 5AZ Holder with rubber mount to front axle support | F54/F55/F56/F57/F60 | M12 10.9 | 100 Nm |