Removing and installing/replacing idler pulley for drive belt (B38 engine) (Cooper Clubman base)

Preliminary work needed: 

• Remove DRIVE BELT .

Removal: 

Unclip end cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Tighten screw (1).

Tightening torque. 11 28 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Mount end cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install DRIVE BELT .