Removing and installing/replacing luggage compartment antenna for Comfort Access

Preliminary work needed: 

• Remove luggage COMPARTMENT FLOOR COVERING .

Removal: 

Disconnect the connector (1).

Release the detents (2) on the holder and feed out the luggage compartment antenna for Comfort Access (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Put the luggage compartment antenna for Comfort Access (3) in the holder.

Connect the connector (1).

Installation note: 

Make sure the luggage compartment antenna for Comfort Access (3) engages correctly (2) in the holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install luggage COMPARTMENT FLOOR COVERING .