REP-TAT-P-5215-02 Installing the thigh support on the front seat

• Version with seat heating only: 
• Connect plug connection (1) and lock.
• Position the thigh support (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert thigh support (1) with the guides (2) into the corresponding openings on the seat frame (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Microencapsulated screws must be replaced and may not be reused.
  The screw lining must be completed within 10 minutes, as the hardening begins after this time period.

  Microencapsulated screws must not  be retightened.

• Tighten down screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Adjust thigh support (1) towards the front.
• Hook the edge stripping (2) of the seat cover into the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.