Removing and installing/replacing tank cover on left or right

Preliminary work needed: 

• Dismantle TENSION STRUT .

Removal: 

Right side: 

Unscrew the screws (1).

Remove tank cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Left side: 

Unscrew the screws (1).

Remove tank cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Right side: 

Put on tank cover (2).

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Left side: 

Put on tank cover (2).

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install TENSION STRUT .