Removing and installing/replacing support for front lower bumper cover

Preliminary work needed: 

• Remove front BUMPER COVER .

Removal: 

Unscrew the screws (1).

Detach holder of air duct (2) upwards out of support (3).

Remove carrier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert support (3).

Attach holder of air duct (2) in support (3).

Tighten down screws (1).

Tightening torque 51 11 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install front BUMPER COVER