(Installing the front right wheel arch cover)
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Guide the front wheel arch cover (5) in.
- Tighten down screws (1) and (2).(TIGHTENING TORQUE SPECIFICATIONS)
Wheel arch cover Screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm - Tighten nut (3).(TIGHTENING TORQUE SPECIFICATIONS)
Wheel arch cover Screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm - Secure the clip (4).