5161 Chassis Reinforcement
5161 TIGHTENING TORQUE OVERVIEW
| Connecting support to rear console tunnel | ||
| Flat-head screw M8x16 | Tightening torque | 19 Nm |
| Torsion strut to front axle/body, middle | ||
| M10 | Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Torsion strut to mounting | ||
| Hexagon screw M12x48 Replace screws |
Joining torque | 100 Nm |
| Angle of rotation | 90° | |
| Torx screw M10x16 | Tightening torque | 38 Nm |
| Torsion strut to side member | ||
| M12 | Joining torque | 100 Nm |
| Angle of rotation | 70° | |