Releasing the mounted parts from the front axle support

Only on right side: Release the screws (3) and remove the holder for the washer fluid reservoir (2).
NOTE: Perform the steps on the right and left side.
Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.
Unlock the fuse (1) of the lock (2) from the holder for the charge air cooler.
Fully remove the lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Release the bolt (2) of the engine support (3) on the front axle (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.
Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.