Take engine out of installation orientation
CAUTION:
Components connected to the engine joint or cross member.
Injury hazard!
Injury hazard!
- Check lifting eyes and engine mounting brackets for damage, e.g. cracks.
- Attach the component to correctly mounted engine joints or cross members only.
- Only lift the component, do not shift it forwards, backwards or in transverse direction.
- Release spindle (1).
- Detach hook of special tools 0 490 561 (11 0 000) (2) and (3) from mounting lugs and slide out chains.
- Remove cross member with help of a second person.
- Clip in the filler neck (1) of the washer fluid reservoir.
- Loosen screws (1).
- Feed out and remove special tool 2 459 012 from cylinder head.