LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mini
>>
2022
>>
Cooper SE
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (1 Of 2)
>>
Installing the cross-member on the rear axle
Installing the cross-member on the rear axle
Install the cross-member (2).
Replace screws (1).
Parts:
Screws
Tighten down screws (1).
Courtesy of BMW OF NORTH AMERICA, INC.
TIGHTENING TORQUES SPECIFICATION
Cross-member/torsion strut to axle support and stand
Hexagon screw M12x48 Replace screws.
Joining torque
100 Nm
Angle of rotation
90°
Courtesy of BMW OF NORTH AMERICA, INC.