(Install the rear left torsion strut)
NOTE:
TECHNICAL INFORMATION
Driving without torsion strut is prohibited.
Driving without torsion strut is prohibited.
- Thread in torsion strut (5) and install.
- Replace screws (1) to (4).
Parts: Screws
- Hand-tighten the bolts (1) to (4).
- Tighten down screw (4).(TIGHTENING TORQUE SPECIFICATIONS)
Torsion strut to mounting Hexagon screw
M12x48
Replace screwsJoining torque 100 Nm Angle of rotation 90° Torx screw M10x16 Tightening torque 38 Nm - Tighten down screw (3).(TIGHTENING TORQUE SPECIFICATIONS)
Torsion strut to mounting Hexagon screw
M12x48
Replace screwsJoining torque 100 Nm Angle of rotation 90° Torx screw M10x16 Tightening torque 38 Nm - Tighten down screws (2).(TIGHTENING TORQUE SPECIFICATIONS)
Torsion strut to mounting Hexagon screw
M12x48
Replace screwsJoining torque 100 Nm Angle of rotation 90° Torx screw M10x16 Tightening torque 38 Nm - Tighten down screws (1).(TIGHTENING TORQUE SPECIFICATIONS)
Torsion strut to mounting Hexagon screw
M12x48
Replace screwsJoining torque 100 Nm Angle of rotation 90° Torx screw M10x16 Tightening torques 38 Nm