Removing the engine from the assembly jig

CAUTION: Heavy component.
Heavy components can lead to injury or damage.

Remove and install heavy components with the aid of another person/other persons.

Hook the workshop crane with the special tool 0 490 579 (11 0 070) and position the engine.

Courtesy of BMW OF NORTH AMERICA, INC.
Release nuts at the special tool 2 413 082.
Detach the holder (2) in the direction of the arrow.
Release the engine (1) with the special tool 2 455 010 out of the special tool 2 413 082 in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the standard screws (arrows).
Guide out and remove the special tool 2 455 010 at the engine (1).

Courtesy of BMW OF NORTH AMERICA, INC.