61 31 195 Removing and installing front controller (Countryman 2017-2023, except PHEV)
Preliminary work needed:
- Remove the CENTER CONSOLE TRIM .
Removal:
Release screws (1) and thread out controller (2) from center console trim (3).
Installation:
Insert controller (2) correctly in center console trim (3).
Tighten down screws (1).
Tightening torque 61 31 5AZ .
NOTE:
Ensure controller (2) is correctly fitted in guide.
Required follow-up work:
- Install the CENTER CONSOLE TRIM .
- For replacement: Program/encode