Installing the engine on the assembly jig

CAUTION: Heavy component.
Heavy components can lead to injury or damage.

Remove and install heavy components with the aid of another person/other persons.

Tighten the standard screws (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Age of brake fluid
M10x30	Tightening torque	38Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Prepare the assembly stand O 495 187 (00 2 300) with the special tool 0 495 196 (00 2 320).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Special tool 00 2 320 to special tool 00 2 300
M14X95	Tightening torque	130Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Special tool 11 8 930 to special tool 00 2 320
M14x35	160Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Position the workshop crane with the special tool 0 490 579 (110 070) and the engine on the special tool 0 495187(00 2 300).

Courtesy of BMW OF NORTH AMERICA, INC.
Detach the holder (2) in the direction of the arrow.
Position the engine (1) with the special tool 2 455 010 in the direction of the arrow on the special tool 2 413 082.

Courtesy of BMW OF NORTH AMERICA, INC.
Lock the holder (1) in the direction of the arrow.
Tighten nuts (2) .

Courtesy of BMW OF NORTH AMERICA, INC.