12 51 235 Remove and install/replace Module 1, sensor system engine wiring (Countryman base FWD, Countryman base ALL4 AWD)

Preliminary work 

• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING INTAKE PORT .
• Refer to REMOVING INTAKE SILENCER HOUSING .
• Refer to REMOVING TANK VENT VALVE .
• Refer to REMOVING CROSS CONNECTION .
• Refer to REMOVING FAN COWL WITH ELECTRIC FAN .
• Refer to REMOVING INTAKE PLENUM .
• Refer to REMOVING THE FRONT UNDERBODY PROTECTION .

Follow-up work 

• Refer to INSTALLING FRONT UNDERBODY PROTECTION .
• Refer to INSTALLING THE INTAKE PLENUM .
• Refer to INSTALLING FAN COWL WITH ELECTRIC FAN .
• Refer to INSTALLING CROSS CONNECTION .
• Refer to INSTALLING THE TANK VENT VALVE .
• Refer to INSTALLING INTAKE SILENCER HOUSING .
• Refer to INSTALLING INTAKE PORT .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .